eSun General Purpose LCD 3D Print Resin 500g

Esun General Purpose LCD 3D Print Resin is specifically designed for LCD/LED light source printers to achieve better printing quality.

Product Features

• General Purpose Resin, Compatible to most LCD printers and DLP with LED UV.
• High Hardness 88 shore D, Low Shrinkage
• Faster Printing Speed
• Low Odor and No Toxic

Resin parameters

Solidify wavelength: 395nm to 405nm
Hardness (D): 88D
Viscosity (25C,mPa.s): 100 to 150 mpa.s
Density: 1.07 to 1.12 g / cm3
Shrinkage of Vol.: 3.72%-4.24%

Physical Properties

Flexural strength (Mpa): 59Mpa to 70Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile strength (Mpa): 35Mpa to 42 Mpa
Elongation at break (%): 11% to 20%
Hardness (D): 88D

1. Storage

• 1) Keep away from light and sealed at room temperature.
• 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
• Avoid any dusty or moist environment.

2. Usage

• Shake well before use. Avoid any direct sunlight during usage.
• Keep it away from the children. Do not put in mouth. 
• Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
• If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
• Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.